Ultrasound-guided arthrocentesis for condylar head fracture: a technical report.

OBJECTIVES: Double puncture arthrocentesis (DPA) of the temporomandibular joint (TMD) is considered an effective preservative option for managing mandibular condylar head fractures. However, the procedure is commonly performed by a traditional "blind" method using anatomical characteristics. In the present study, an ultrasonography (US) device was applied for the treatment of a case with a fractured mandibular condyle. METHODS: A 79-year-old female was diagnosed right side condylar head fracture complaining pain of right TMD and reduced mouth opening range: inter-incisor distance of 20 mm. Since the fracture position was high and inoperable, the decision was made to perform DPA of the TMD. The US probe was positioned parallel and slightly oblique to the major axis of the mandibular ramus. Both the posterior and anterior insertions into the joint space were performed according to the axis mentioned above, which enabled the operator to visualize the entirety of the needle. RESULTS: The device offered safety and ensured accuracy by providing real-time visual aid to the surgeon. The procedure provided an early increase in the inter-incisor distance (31 mm) and pain relief. CONCLUSIONS: Hence, for the preservative treatment of mandibular condylar head fractures, based on the present study, we recommend US-guided arthrocentesis as a safe, feasible, and effective therapeutic option instead of the conventional "blind" method.

FLRT2 mediates chondrogenesis of nasal septal cartilage and mandibular condyle cartilage.

Nasal septal cartilages (NSCs) and mandibular condyle cartilages (MCCs) are two important cartilages for craniomaxillofacial development. However, the role of FLRT2 in the formation of NSCs and MCCs remains undiscovered. NSCs and MCCs were used for immunocytochemistry staining of collagen II, toluidine blue staining, and alcian blue staining. Quantitative reverse transcription­PCR and western blot were used to detect mRNA and protein expressions of FLRT2, N-cadherin, collagen II, aggrecan, and SOX9. Cell proliferation of MCCs and NSCs was tested by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and cell counting kit­8 assay. Cell migration of MCCs and NSCs was examined by wound healing assay and Transwell. Chondrogenesis of MCCs and NSCs were similar in morphological characteristics, while different in cell proliferation, migration, and extracellular matrix. FLRT2 promotes the proliferation and migration of NSCs. There were up-regulation of N-cadherin and down-regulation of collagen II, aggrecan, and SOX9 in NSC with knock down FLRT2. The current study, as demonstrated by Xie et al., reveals that FLRT2 overexpression in Sprague-Dawley neonatal rats promotes the proliferation and migration of NSCs and MCCs, decreases N-cadherin while increases collagen II, aggrecan, and SOX9 in NSC and MCCs. Altogether, FLRT2 mediates chondrogenesis of NSCs and MCCs.

A single-centre retrospective 10-year experience of the rhombic 3D condylar fracture plate for open reduction and internal fixation of condylar neck and base fractures.

Fractures of the mandibular condyle account for a significant proportion of mandibular fractures. The specific functional loads require particular specifications for the implant design used for open reduction and internal fixation of such fractures. The clinical and radiographic outcomes in patients treated using a single rhombic 3D condylar fracture plate for open reduction and internal fixation at a single institution, and who fulfilled the inclusion and exclusion criteria, are presented. The primary outcome variables were: occlusion, maximum interincisal distance and mandibular excursion at 1, 3, and 6 months postoperatively, and radiographic measurements for mandibular height and gonion angle. In total, 263 patients were included, of whom 173 (65.8%) were male and 90 (34.2%) female. The mean age was 40.4 ± 18.9 years. There was satisfactory occlusion in 98.9% of patients at the 6-month follow-up, and a significant improvement in all parameters for mandibular excursion (p < 0.001), with a reduced ramus height and an increase in the gonion angle on the fractured side. Excellent clinical and radiographic results were achieved using the rhombic-shaped implant, deeming it appropriate for the osteosynthesis of mandibular condyle fractures.

Age estimation using postmortem computed tomography-based Hounsfield unit values of the palate and mandibular condyle and the Eichner classification.

Age estimation is important in forensic investigations of unidentified human remains. This study assessed the correlation between age and Hounsfield unit (HU) values of the palate and mandibular condyle based on postmortem computed tomography (CT) and analyzed the influence of occlusal support in developing an age estimation method for Japanese individuals, including older adults. The sample consisted of a training dataset (357 cadavers) and a validation dataset (300 cadavers) that underwent postmortem CT. Three measurements were selected: the respective HU values of the palate and mandibular condyle and the Eichner classification. The correlation coefficients between age and HU values were also evaluated. Multiple stepwise regression analysis was performed to evaluate the significance of four parameters (sex, respective HU values of the palate and mandibular condyle, and the Eichner classification) for age estimation and to determine the best age estimation formula. In the validation tests, inaccuracy and bias were calculated for the groups aged ≥65 or <65 years. Significant correlations between age and HU values of the palate and mandibular condyle were observed, regardless of sex. In multiple stepwise regression analysis, all variables except sex were significantly correlated with age. The age estimation formula from the regression analysis was useful, and the validation test exhibited high accuracy, especially in older adults. The HU values of the palate and mandibular condyle and the Eichner classification are useful for age estimation in Japanese individuals.

Correlation between Malocclusion and Mandibular Fractures: An Experimental Study Comparing Dynamic Finite Element Models and Clinical Case Studies.

Mandibular fractures are very common in maxillofacial trauma surgery. While previous studies have focused on possible risk factors related to post-operative complications, none have tried to identify pre-existing conditions that may increase the risk of mandibular fractures. We hypothesized, through clinical observation, that anatomical conditions involving poor dental contacts, such as malocclusions, may increase the risk of mandibular fractures. This work was subdivided into two parts. In the first part, Digital Imaging and Communications in Medicine (DICOM) data of four healthy patients characterized by different dentoskeletal occlusions (class I, class II, class III, and anterior open bite) have been used to develop four finite element models (FEMs) that accurately reproduce human bone structure. A vertical and lateral impact have been simulated at increasing speed on each model, analyzing the force distribution within the mandibular bone. Both vertical and lateral impact showed higher level of stress at the impact point and in the condylar area in models characterized by malocclusion. Specifically, the class III and the open bite models, at the same speed of impact, had higher values for a longer period, reaching critical stress levels that are correlated with mandibular fracture, while normal occlusion seems to be a protective condition. In the second part of this study, the engineering results were validated through the comparison with a sample of patients previously treated for mandibular fracture. Data from 223 mandibular fractures, due to low-energy injuries, were retrospectively collected to evaluate a possible correlation between pre-existing malocclusion and fracture patterns, considering grade of displacement, numbers of foci, and associated CFI score. Patients were classified, according to their occlusion, into Class I, Class II, Class III, and anterior open bite or poor occlusal contact (POC). Class I patients showed lower frequencies of fracture than class II, III, and open bite or POC patients. Class I was associated with displaced fractures in 16.1% of cases, class II in 47.1%, class III in 48.8% and open bite/POC in 65.2% of cases (p-value < 0.0001). In class I patients we observed a single non-displaced fracture in 51.6% of cases, compared to 12.9% of Class II, 19.5% of Class III and 22.7% of the open bite/POC group. Our analysis shows that class I appears to better dissipate forces applied on the mandible in low-energy injuries. A higher number of dental contacts showed a lower rate of multifocal and displaced fractures, mitigating the effect of direct forces onto the bone. The correlation between clinical data and virtual simulation on FEM models seems to point out that virtual simulation successfully predicts fracture patterns and risk of association with different type of occlusion. Better knowledge of biomechanics and force dissipation on the human body may lead to the development of more effective safety devices, and help select patients to plan medical, orthodontic/dental, and/or surgical intervention to prevent injuries.

Relationships between functional temporomandibular joint space and disc morphology, position, and condylar osseous condition in patients with temporomandibular disorder.

OBJECTIVE: To investigate the correlations between joint space and temporomandibular joint (TMJ) components and the compressive states of the disc and condyle subsequent to joint space changes. MATERIALS AND METHODS: A total of 240 TMJs were categorized according to disc morphology, disc position, and condylar osseous condition. The two-dimensional (2D) and three-dimensional (3D) measurements were compared. The functional joint space (FJS) and disc areas on closed- and open-mouth images (DA-C and DA-O) were also calculated, and the joint space was measured in five directions. Different groups of TMJ components were compared. A spring model was used to simulate the effect of condylar displacement on the disc and condyle. RESULTS: Disc morphology was strongly correlated with its position. The measurements were equivalent between 2D and 3D methods. DA-C and FJS differed significantly between groups. The DA-C to FJS ratio differed between the Class 2 and Class 3 groups and between disc displacement groups with and without reduction. Altered disc morphology and position were correlated with significant changes in joint space in the 60°, 90°, and 120° directions. Despite minor discrepancies among condylar osseous conditions, reduced joint space was correlated with bone destruction at the corresponding site. The spring model stimulation revealed that condylar displacement caused elevated stresses on the disc and condyle. CONCLUSIONS: Condylar displacement causes joint space alterations while exerting compressive pressure on both the disc and condyle. CLINICAL RELEVANCE: Proper condylar positioning within the fossa is recommended to ensure sufficient articular disc accommodation.

Mandibular condyle volumes are associated with facial asymmetry in patients with cleft lip and palate: A retrospective cohort study.

This study compares condylar volumetric asymmetry and facial asymmetry in patients with cleft lip and/or palate (CLP) and controls. The mandibular condyle is important to facial growth, but its role in facial asymmetry for those with CLP has not been described. Condylar volumes and mandibular asymmetry were retrospectively calculated using Mimics Version 23.0 (Materialise, Leuven, Belgium) from patients with CLP undergoing computed tomography (CT) imaging and a cohort of controls. A total of 101 participants, 60 with CLP and 41 controls, had mean condylar volumetric asymmetry of 16.4 ± 17.4 % (CLP) and 6.0 ± 4.0 % (controls) (p = 0.0002). Patients with CLP who had clinically significant chin deviation (>4 mm) had more asymmetric condyles than those without significant chin deviation (p = 0.003). The chin deviated toward the smaller condyle in patients with facial asymmetry more often than in patients without facial asymmetry (81 % vs. 62 %, p = 0.033). While controls had some degree of condylar asymmetry, it tended to be milder and not associated with facial asymmetry. There is a greater degree of condylar volumetric asymmetry in patients with CLP compared to individuals in the general population. Clinically significant facial asymmetry in CLP is associated with a higher degree of condylar asymmetry, with the facial midline deviating toward the smaller condyle.

[Mandibular condyle localization in orthognathic surgery based on mandibular movement trajectory and its preliminary accuracy verification].

OBJECTIVE: To establish and assess the precision of pre-surgical condyle position planning using mandibular movement trajectory data for orthognathic surgery. METHODS: Skull data from large-field cone beam computed tomography (CBCT) and dental oral scan data were imported into IVSPlan 1.0.25 software for 3D reconstruction and fusion, creating 3D models of the maxilla and mandible. Trajectory data of mandibular movement were collected using a mandibular motion recorder, and the data were integrated with the jaw models within the software. Subsequently, three-dimensional trajectories of the condyle were obtained through matrix transformations, rendering them visually accessible. A senior oral and maxillofacial surgeon with experience in both diagnosis and treatment of temporomandibular joint disease and orthognathic surgery selected the appropriate condyle position using the condyle movement trajectory interface. During surgical design, the mobile mandibular proximal segment was positioned accordingly. Routine orthognathic surgical planning was completed by determining the location of the mandibular distal segment, which was based on occlusal relationships with maxilla and facial aesthetics. A virtual mandible model was created by integrating data from the proximal and distal segment bone. Subsequently, a solid model was generated through rapid prototyping. The titanium plate was pre-shaped on the mandibular model, and the screw hole positions were determined to design a condylar positioning guide device. In accordance with the surgical plan, orthognathic surgery was performed, involving mandibular bilateral sagittal split ramus osteotomy (SSRO). The distal segment of the mandible was correctly aligned intermaxillary, while the proximal bone segment was positioned using the condylar positioning guide device and the pre-shaped titanium plate. The accuracy of this procedure was assessed in a study involving 10 patients with skeletal class Ⅱ malocclusion. Preoperative condyle location planning and intraoperative positioning were executed using the aforementioned techniques. CBCT data were collected both before the surgery and 2 weeks after the procedure, and the root mean square (RMS) distance between the preope-rative design position and the actual postoperative condyle position was analyzed. RESULTS: The RMS of the condyle surface distance measured was (1.59±0.36) mm (95%CI: 1.35-1.70 mm). This value was found to be significantly less than 2 mm threshold recommended by the expert consensus (P < 0.05). CONCLUSION: The mandibular trajectory may play a guiding role in determining the position of the mandibular proximal segment including the condyle in the orthognathic surgery. Through the use of a condylar positioning guide device and pre-shaped titanium plates, the condyle positioning can be personalized and customized with clinically acceptable accuracy.

The effect of tooth loss on the temporomandibular joint space: A CBCT study.

OBJECTIVE: The tooth loss has a significant impact on the positioning of the condyle in the glenoid fossa and joint spaces of the temporomandibular joint (TMJ). The aim of this study was to assess the association between tooth loss and TMJ spaces using cone beam computed tomography (CBCT) images. MATERIALS AND METHODS: This retrospective investigation involved the evaluation of CBCT images of the bilateral TMJs in a cohort of 111 individuals, comprising 68 males and 43 women. The dentition of the patients was categorized into three categories, including A (65.4%), B (19.1%), and C (16.4%), based on the Eichner index. Anterior, superior, and posterior joint spaces were then measured in sagittal views. The Kruskal-Wallis test and Mann-Whitney test were employed to identify significant differences among the three Eichner groups. RESULTS: The findings of the present study suggested that there was no statistically significant variation in the anterior joint space among different Eichner groups within the general population (p = .781). Nevertheless, the superior and posterior joint spaces exhibited statistically significant alterations, as indicated by p-values of .039 and .010, respectively. It was detected that condyles were positioned inferiorly and posteriorly in group C when compared to groups A and B. CONCLUSION: The present study indicated that greater loss of tooth-supporting zones is associated with posterior and inferior displacement of condyles. Understanding these relationships helps emphasize how crucial it is to replace missing teeth to enhance occlusion support and, in turn, stop the progression and further deterioration of temporomandibular disorders.

Autogenous, alloplastic, or hybrid for total mandibular reconstruction; is here an optimal path?

For less fit patients, total reconstruction of the mandible (TRM) is an elucidated alternative for severe maxillofacial defects. This study aimed to comprehensively review and analyze the existing evidence, irrespective of the underlying pathologies, to provide a consolidated overview of the current state of TRM. An electronic search was performed on PubMed, Embase, Scopus, and Google Scholar to identify studies reporting TRM without restrictions on patient age, type of pathology underlying the mandibular defect, and study type. Electronic search identified 390 studies; only 21 met the inclusion criteria, documenting 7 (33.3%) autogenous, 6 (28.6%) alloplastic, and 8 (38.1%) hybrid TRMs. All studies reported one clinical case, except for two studies that reported two patients treated with TRM. The mean age of the patients was 39.0 ± 19.4 years, and the mean follow-up was 22.3 ± 14.7 months. Osteomyelitis was the most common pathology. Bilateral condyles were preserved in only two cases. The TRM has been reported in clinical cases only and no large cohort study is available. Functional and aesthetic parameters have either not been reported or have been reported in heterogeneous formats, thus hampering comparisons of autogenous, alloplastic, and hybrid TRMs. Overall, TRM in patients presenting with severe maxillofacial defects achieved promising clinical outcomes endowed with acceptable function and aesthetics. Large cohort studies are needed to validate these results.

Temporal gene expression profiling during early-stage traumatic temporomandibular joint bony ankylosis in a sheep model.

BACKGROUND: Investigating the molecular biology underpinning the early-stage of traumatic temporomandibular joint (TMJ) ankylosis is crucial for discovering new ways to prevent the disease. This study aimed to explore the dynamic changes of transcriptome from the intra-articular hematoma or the newly generated ankylosed callus during the onset and early progression of TMJ ankylosis. METHODS: Based on a well-established sheep model of TMJ bony ankylosis, the genome-wide microarray data were obtained from samples at postoperative Days 1, 4, 7, 9, 11, 14 and 28, with intra-articular hematoma at Day 1 serving as controls. Fold changes in gene expression values were measured, and genes were identified via clustering based on time series analysis and further categorised into three major temporal classes: increased, variable and decreased expression groups. The genes in these three temporal groups were further analysed to reveal pathways and establish their biological significance. RESULTS: Osteoblastic and angiogenetic genes were found to be significantly expressed in the increased expression group. Genes linked to inflammation and osteoclasts were found in the decreased expression group. The various biological processes and pathways related to each temporal expression group were identified, and the increased expression group comprised genes exclusively involved in the following pathways: Hippo signaling pathway, Wnt signaling pathway and Rap 1 signaling pathway. The decreased expression group comprised genes exclusively involved in immune-related pathways and osteoclast differentiation. The variable expression group consisted of genes associated with DNA replication, DNA repair and DNA recombination. Significant biological pathways and transcription factors expressed at each time point postoperatively were also identified. CONCLUSIONS: These data, for the first time, presented the temporal gene expression profiling and reveal the important process of molecular biology in the early-stage of traumatic TMJ bony ankylosis. The findings might contributed to identifying potential targets for the treatment of TMJ ankylosis.

Long-term evaluation of condylar positional and volumetric parameters and skeletal stability in Class III bimaxillary orthognathic surgery patients.

This retrospective study examined long-term (4-5 years) condylar positional and volumetric changes and skeletal stability after bimaxillary orthognathic surgery in skeletal Class III patients. Pre-surgical (T0: 0.9 ± 1.1 months) and post-surgical (T1: 0.6 ± 0.7 months; T2: 12.8 ± 3.1 months; T3: 56.5 ± 6.5 months) cone beam computed tomography (CBCT) images of 22 patients were obtained. CBCT multiplanar reformation (MPR) images were generated, and three-dimensional (3D) condylar models were constructed and superimposed to compare changes in condylar volume from pre- to postoperative. Condylar position in the sagittal and coronal planes altered immediately after surgery; however at long-term follow-up, the condyles had returned to their pre-surgical position. The condyles remained slightly inwardly rotated at short-term (-2.6°, 95% confidence interval -3.5° to -1.7°) and long-term (-1.9°, 95% confidence interval -2.8° to -1.0°) follow-up. Changes in condylar volume were insignificant after surgery. Condylar positional changes had no effect on skeletal stability. However, patients with an increased face height prior to surgery and more retrusive jaw position postoperatively were more prone to condylar resorption. Surgical changes remained stable 4-5 years after surgery. In conclusion, condylar position changed insignificantly following surgical correction in Class III patients provided that the correct surgical technique was employed.

Evaluation of condylar and mandibular movements on the upper airway during the use of mandibular advancement device for obstructive sleep apnea treatment.

OBJECTIVES: To evaluate the temporomandibular joint (TMJ), condylar and mandibular movements in obstructive sleep apnea (OSA) patients treated with mandibular advancement device (MAD) and to identify the influence of these anatomic factors on upper airway (UA) volume and polysomnographic outcomes after treatment. MATERIALS AND METHODS: Twenty OSA patients were prospectively treated with MAD. Clinical examinations, cone-beam computed tomography, and polysomnography were performed before MAD treatment and after achieving therapeutic protrusion. Polysomnographic variables and three-dimensional measurements of the TMJ, mandible, and upper airway were statistically analyzed. RESULTS: Condylar rotation, anterior translation, and anterior mandibular displacement were directly correlated with total UA volume, while vertical mandibular translation was inversely correlated with the volume of the inferior oropharynx. MAD treatment resulted in an increase in the volume and area of the superior oropharynx. There was no statistically significant correlation between condylar rotation and translation and polysomnographic variables. With MAD, there was a significant increase in vertical dimension, changes in condylar position (rotation and translation), and mandibular displacement. The central and medial lengths of the articular eminence were inversely correlated with condylar rotation and translation, respectively. The lateral length of the eminence was directly correlated with condylar translation, and the lateral height was directly correlated with condylar rotation and translation. CONCLUSION: Condylar and mandibular movements influenced UA volume. The articular eminence played a role in the amount of condylar rotation and translation. CLINICAL RELEVANCE: Individualized anatomical evaluation of the TMJ proves to be important in the therapy of OSA with MAD.

Volumetric comparison of mandibular condyles and mandibles in the different skeletal classes in the Saudi population.

Background: Assessing the relationship between the condyle and mandible volume and the various skeletal classes is essential in orthodontic diagnosis. The current study evaluated this relationship using volumetric cone-beam computed tomography (CBCT), cephalometric methods, and the correlations between them. Materials and Methods: The study examined 37 full-head CBCTs (74 condyles) from adults in the Saudi population. The condyle and mandible were separated from within the CBCT images. The volume of each segment was compared to measurements from multiple cephalometric analyses. Results: The combined total condylar volume has a moderate correlation with the maxillomandibular differential in each of the genders and in the total sample. Mandibular volume has a significant correlation with the Wits appraisal (sagittal classification) in males. It was also significantly correlated with the vertical classification using gonial angles in females and in the total sample. Conclusion: The relationship between mandible and condyle volume and cephalometric measurements is both dimensional and within the maxillomandibular complex rather than positional or related to the cranial base. Also, the correlation between the condylar and mandibular volumes and the sagittal and vertical dimensions in the orthodontic skeletal classes provides better insight into the mandibular complex.

Three-dimensional evaluation of condylar morphology after orthodontic treatment in adult patients with Class II malocclusion by cone-beam computed tomography.

BACKGROUND: The aim of this study was to evaluate the condylar morphological changes after orthodontic treatment in adult patients with Class II malocclusion using a Cone-beam computed tomography (CBCT). METHODS: Images of twenty-eight adult patients with Class II malocclusion who have no temporomandibular symptoms were involved in this study. To analyze the post-treatment changes in condylar morphology, mimics 17.0 software was used to measure several values and reconstruct the three-dimensional condyle, including height of the condyle, area and bone mineral density of the maximum axial and sagittal section, volume and bone mineral density of the three-dimensional condyle and condylar head before and after orthodontic treatment. Using SPSS 19.0 software package Paired t-test was applied for comparison of condylar morphology analysis between pre-treatment and post-treatment. RESULTS: Height of condylar head increase significant (P < .05). Bone mineral density showed a decrease in the maximum axial and sagittal section, three-dimensional condyle and condylar head (P < .01). Evaluation of volume revealed that volume of both condyle and condylar head decrease considerably (P < .05). No significant difference was detected in other values ((P > .05). CONCLUSION: Condylar volume decreased and height of condylar head have changed, so we speculated that adaptive bone remodeling of the condyle occurs.

Accuracy and stability of the condyle position after orthognathic surgery: A retrospective study.

The purpose of this study was to evaluate the accuracy and stability of condylar positioning in patients treated with bimaxillary procedures compared with patients treated with maxillary procedures alone. All patients had undergone treatment at Odense University Hospital and were treated with inferior maxillary procedures. The primary outcome was changes in condyle position and the primary predictor variable was time: pre-operative (T0) measurements to 1-week post-operative (T1) and 1-year post-operative (T2) measurements. Condyle movement was measured using dual voxel-based alignment. Sixteen patients were included. Seven patients underwent solitary maxillary procedure and 9 patients bimaxillary procedure. Bimaxillary procedures overall showed a condyle positional change in pitch from T0 to T1 and T1 to T2 compared to maxillary procedures alone. Condylar translation was stable despite large differences in positioning. Compared to solitary maxillary procedures, bimaxillary procedures showed a statistically significant anterocranial rotation at 1-week follow-up movement (3.95° vs. -0.95°; SD 3,74 vs 1,05; P value = 0.000) and an additional statistically significant anterocranial movement at 1 year after surgery (4.89° vs 0.60°; SD 3,82 vs 0,92; P value = 0.000). In conclusion a need for greater anterocranial stability of the sagittal split osteotomy than that provided by 3 bicortically fixated screws alone might be indicated.

Influence of botulinum toxin A in pain perception and condyle-fossa relationship after the management of temporomandibular dysfunction: a randomized controlled clinical trial.

OBJECTIVES: To investigate the pain perception (PP) and condyle-fossa relationship (CFR) after botulinum toxin A (BoNTA) injection in the masseter muscles of painful muscular temporomandibular dysfunction (TMD) patients. MATERIALS AND METHODS: Fourteen women (aged 29.7 ± 5.4 years) diagnosed with myogenic TMD were randomized in the BoNTA-treated group (TG) and control group (CG). TG masseter muscles (n = 7) were bilaterally injected with 30 U. The CG (n = 7) were injected with saline injections. Condyle-fossa relationship (CFR) spaces were measured in sagittal (SP) and frontal planes (FP) of images of cone-beam computed tomography (CBCT) done before (T0) and after 30 days' interventions (T1). Visual analogue scale (VAS) measured the patients' TMD pain perception (PP). Data were compared by generalized linear models considering the results over time (α = .05). RESULTS: There were no statistical differences in CFR in the SP or FP for TG and CG over time (p ˃ .05), except for frontal lateral space CFR (p < .05). In both groups, the condyle was positioned medially after interventions. Frontal lateral space increased in TG for both, left and right sides, over time (p < .05), as well as PP decreased over time (p < .05) for TG and CG. CONCLUSIONS: The results depicted that there was no significant association with BoNTA injection in TMD masseter muscles in PP and CFR, except considering the frontal lateral space of CFR. CLINICAL RELEVANCE: BoNTA injection in the masseter muscles may not promote clinically significant shifts in the condyle-fossa relationships of muscular TMD patients.

Local injection of abaloparatide promotes mandibular condyle lengthening in adolescent rats via enhancing chondrogenesis and ossification.

BACKGROUND: Mandibular condylar hypoplasia negatively affects patient's facial appearance and dentofacial function. OBJECTIVE: To investigate the effect of local injection of the drug abaloparatide (ABL), an analogue of parathyroid hormone related protein (PTHrP), on promoting lengthening of the mandibular condyle. METHODS: Thirty adolescent male Sprague-Dawley rats were randomly divided into two groups, which received the injection of ABL or normal saline (the control) every 3 days in the temporomandibular joint (TMJ) cavity. Cone-beam computed tomography and immunohistochemistry assays were performed at 2, 4 and 6 weeks since the injection. Mandibular condylar chondrocytes (MCC) and pre-osteoblasts were treated with ABL or PBS, followed by the CCK-8 detection, IC50, real-time PCR assay, Western Blot and immunofluorescence staining. RESULTS: In vivo, compared with the control, the ABL group significantly increased the mandibular condylar process length (by 1.34 ± 0.59 mm at 6 weeks), the thickness of the cartilage layer, and enhanced the matrix synthesis. The ABL group had significant up-regulation of SOX 9, COL II, PTHrP and PTH1R, down-regulation of COL X in the cartilage, up-regulation of RUNX 2, and unchanged osteoclastogenesis in the subchondral bone. In vitro, the intra-TMJ injection of ABL promoted the MCC proliferation, with up-regulated expression of chondrogenic genes, and enhanced osteogenic differentiation of the pre-osteoblasts. CONCLUSIONS: Intra-TMJ injection of abaloparatide promotes mandibular condyle lengthening in the adolescent rats via enhancing chondrogenesis in the mandibular condylar cartilage and ossification in the subchondral bone.

Effect of arthroscopic discopexy on condylar growth in adolescents with temporomandibular joint disc displacement without reduction: A retrospective self-controlled case series study.

This study was a retrospective self-controlled study that aimed to evaluate the effect of arthroscopic discopexy on condylar height and mandibular position in adolescents with temporomandibular joint (TMJ) anterior disc displacement without reduction (ADDwoR). Patients between 10 and 20 years of age and diagnosed with bilateral TMJ ADDwoR by magnetic resonance image (MRI) were included in this study. All patients underwent a period of natural course before arthroscopic surgery and then a follow-up period postoperatively. Changes in condylar height and mandibular position were measured by MRI and X-ray radiographs. Data were analyzed by paired t-test, Pearson correlation analysis, and generalized estimating equations. This study comprised a total of 40 patients with a mean age of 14.80 years. Pearson correlation analysis showed correlations between condylar height and mandibular position changes. The condylar height change during the post-operative period was significantly higher than that during natural course period (3.57 mm, p < 0.001). The changes in mandibular position (including ANB angle, SNB angle, and Pog-Np) were significant different (all p < 0.05) between the two periods. This study found that arthroscopic discopexy can promote condylar growth and correct dentofacial deformity in adolescents with bilateral TMJ ADDwoR.

Effect of occlusal stabilisation splint with or without arthroscopic disc repositioning on condylar bone remodelling in adolescent patients.

The aim of this study was to investigate the treatment effects of a stabilisation splint (SS) with and without arthroscopic disc repositioning (ADR) on condylar bone remodelling in adolescent patients with anterior disc displacement without reduction (ADDwoR). Cone beam computed tomography and magnetic resonance imaging were used to analyse condylar bone remodelling, condyle position, and disc position. Twenty-two temporomandibular joints of 14 patients who underwent ADR (age range 12-20 years; mean follow-up 12.5 ± 7.8 months) and 21 temporomandibular joints of 14 patients who did not undergo ADR (age range 13-20 years; mean follow-up 11.1 ± 5.1 months) were included. The change in bone volume (P < 0.001), rate of bone volume change (P < 0.001), and change in condyle height (P = 0.031) were significantly greater in patients with ADR than in those without ADR. The changes in posterior joint space (P = 0.013), superior joint space (P = 0.020), and ratio of condyle sagittal position (P = 0.013) were significantly greater in patients with ADR than in those without ADR. All discs in patients who underwent ADR and one disc in those who did not undergo ADR were backward repositioned. In conclusion, in adolescent patients with ADDwoR, ADR with SS therapy achieved better condyle and disc position than SS therapy alone, and also induced bone generation.